|
Overview
D200 Touchscreen Dash Logger - Information at your Fingertips
Description
D200 Videos:
• D200: We take a prototype D200 out in a turbocharged rb20 240sx. (2.0Mb)
• D200: Setting up the D200 settings before use. (3.4Mb)
If you have trouble with the above videos, we also offer them in flash:
• D200: We take a prototype D200 out in a turbocharged rb20 240sx. (2.2Mb)
• D200: Setting up the D200 settings before use. (2.9Mb)
Product Description:
The innovative trends at Powertrain Control Solutions continue with our D200. For the first time, a unit is available which can bring together all the information on a vehicle from almost any input system for monitoring, datalogging & analysis. Unmodified and heavily modified vehicles alike can benefit from the D200 which can combine any set of inputs into one unit. Want to bring together the information from your Lambda meter, aftermarket ECU, transmission controller, fuel controller, MAP sensor, throttle position sensor, vehicle speed and much more? The D200 is your answer. These powerful attributes coupled with a large and easily viewable, even in direct sunlight, LCD touchscreen break new ground.
Product Specifications:
· CAN 2.0b
· RS-232 (Communication with Aftermarket ECUs)
· PC Communication & Download Capability
· Realtime Datalogging & Monitor Screens
· Native Communication with PCS Devices
· 2 Frequency Inputs (rpm, wheel speed, etc)
· 8 Programmable Analog Inputs (MAP, MAF, TPS, CLT, etc.)
· High Resolution (320x240) Blue LCD Screen
· Fully Programmable, Display any Input Parameters
· High Sensitivity, Resistive Touchscreen
· Datalogging from CAN, RS-232 & Built-in Inputs
· Central Datalogging Location for all Electronics
· In-Field Flash Upgradable
· Offered in a durable 4.6 x 6.9 x 1.4in case
· 2MB Standard Memory (4, 8, 16, 32 MB available)
· 120 min of typical Datalog time for 25 Channels at 10
samples/sec for 2MB Standard Memory
Our recommended computer requirements are:
· Processor: Pentium 400MHz or above
· RAM: 64MB
· OS: Windows 98, ME, 2000, XP
· Hard Drive Space: 10MB for install, additional space for datalogs & calibrations
· Video: 1024x768 or greater resolution
· Peripherals: CD-ROM or internet connection required to obtain software
Our minimum computer requirements are:
· Processor: Pentium 200MHz or above
· RAM: 24MB
· OS: Windows 95, 98, ME, NT, 2000, XP
· Hard Drive Space: 10MB for install, additional space for datalogs & calibrations
· Video: 800x600 or greater resolution
· Peripherals: CD-ROM or internet connection required to obtain software
|
; "Powertrain Control Solutions \"PCS\" Dashlogger")
;)